Fuel flow check
You will need to know that your fuel system can supply sufficient fuel to the
carburettors to sustain maximum power. Both the mechanical (912) and
electric fuel pumps must be checked independently.
See Engine
Installation Manual for details.
Airframe
Landing gear, airbrakes and outriggers
With the aircraft raised off the ground, gear operation will need to be
checked.
Note:
Support the aircraft under the inboard ends of the wings under the
main spar. Strong trestles and scraps of styrofoam can be used so that the
wing is not marked. Weight down or tie down the tail of the aircraft.
Landing gear
Check:
¤
Main gear, tailwheel, outriggers, brake attachment bolts and
axle bolts are secure.
¤
Main gear and tailwheel bearings packed with grease, main gear
pivot bearing bolts wire locked.
¤
Brake caliper bolts wire locked.
¤
Tyre pressure for correct inflation - 18 psi (1.2 bar). Leave for
24 hours then check again.
November 2006
XS Monowheel Motorglider
Page 7 - 4
Issue 2
Owners Manual
Summary of Contents for XS Monowheel Motorglider
