PART 2
INSTRUCTIONS FOR CDS 300-301-302 ASSEMBLY
STOOL PACKING
After unpacking the stool, check that the structure and artificial leather comply with order specifi-
cations.
The stool is delivered as follows:
- seat-base assembly (A)
- backrest support inverted (B)
- anatomic backrest fixed to base (C)
- polyethylene bag (D) fixed to backrest support and containing one 5 mm Allen key, one 6 mm.
Allen key, and two TSPCE socket screws (MA 8x18).
Prior to assembly, proceed as follows:
1. Open the polyethylene bag (D) and remove the Allen keys and screws.
2. Use the 6 mm. Allen key to slacken the three screws fixing the backrest support (B) as indicated
by the arrows.
3. Remove the anatomic back (C) from the base paying attention not to cut the leather shoulder piece.
Proceed with assembly as described below.
6
CDS 300-301-302
English
Summary of Contents for CDS 300
