7
EN |
Cleaning
- Always unplug the appliance before you remove accessories or clean the motor unit.
- You can quickly and easily pre-clean the food processor bowl and blender jar with the pulse button. Simply add
some water and washing-up liquid to the dirty bowl or jar and secure the lid. Then use the pulse button until the bowl or
jar is clean. When you pre-clean the food processor bowl in this way, make sure the food processor blade is assembled
in the bowl.
EN |
Environment
Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official
collection point for recycling. By doing this, you help to preserve the environment.
EN |
Troubleshooting
Question
Answer
The appliance does not go on.
Make sure that all assembly indications (on the lid of the bowl, on
the bowl, on the blender jar and on the motor unit) are aligned.
The appliance suddenly stops
running.
The lid of the bowl may have become undone during a heavy
processing job. Close the lid properly. The appliance immediately
starts working again. The processing job is too heavy. Set the
control knob to OFF to switch off the appliance and remove the
mains plug from the wall socket. Then let the appliance cool down
to room temperature. lug in the appliance and switch it on again.
Process smaller batches.
The motor of the device runs but
cone of the citrus press does not
turn.
Please check if you have inserted the tool holder. citrus press
properly. Please check if you have attached the sieve of the citrus
press properly.(Indication on the sieve points to indication on the
handle of the bowl)
Can I clean all removable parts in
the dishwasher?
Yes, except the motor unit and the protection cap for the blade
unit.
What does ‘pulse’ mean?
When you press the Pulse button, the appliance will run at its
highest speed a s long you keep pressing the button. Using the
Pulse button is recommended if you want to have more control
over the processing job, for instance when you are chopping.
Can I pour boiling hot ingredients
into the blender jar?
No, let the liquids or ingredients cool down to 80°C to avoid
damaging the accessories.
Why does the motor produce an
unpleasant smell during processing?
It is very common for a new appliance to give off an unpleasant
smell or emit some smoke the first few times it is used .This
phenomenon will stop after you have used the appliance a number
of times. The appliance may also give off an unpleasant smell or
emit some smoke if it has been used too long. In that case you
have to switch the appliance off and let it cool down for 60
minutes.
What should I do when the blade
unit or motor gets blocked during
processing?
Switch the appliance off and use a spatula to dislodge the ingredients
that block the blade unit. We also recommend processing a smaller
quantity.
What should I do if the blender
leaks?
Switch the appliance off and pour out the ingredients. Then remove
the blade unit interface. Check if the sealing ring has been assembled
properly on the blade unit.
Why does the ice function not
work?
If you want to use the ice button, first turn the control knob to
position ON. Then push the ice button.
