6
EN |
Blender - tips and warnings
Always assemble the sealing ring onto the blender blade unit before you attach the blade unit to the blender jar.
Always let the appliance cool down to room temperature after you have processed two batches.
◆
Built-in safety lock: you can only switch on the appliance when the grander jar has been assembled in such a way
that the ridge on the blade unit is aligned with the ‘locked’ symbol on the motor unit.
- Pre-cut solid ingredients into smaller pieces before you process them.
- If you want to prepare a large quantity, process small batches of ingredients instead of a large quantity at once.
- Use cooked ingredients when you blend a soup.
- When you process a liquid that is hot or tends to foam (e.g. milk), do not put more than 1 litre in the blender jar to
avoid spillage.
- If you are not satisfied with the result, switch off the appliance and stir the ingredients with a spatula. Remove some
of the contents to process a smaller quantity or add some liquid.
If ingredients stick to the wall of the blender jar:
1
Switch off the appliance and unplug it.
2
Remove the lid and use a spatula to remove the ingredients from the wall of the jar.
3
Keep the spatula at a safe distance of approx. 2cm from the blades.
EN |
Grinder- tips and warnings
Always assemble the sealing ring onto the grinder blade unit before you attach the blade unit to the grinder jar.
- Always let the appliance cool down to room temperature after you have processed two batches.
- Put your ingredients into the jar. Fill it no more than half full.
- Fit the sealing ring into the blade unit.
- Turn the blade unit upside down. Lower it into the jar, blades down
4
- Screw the blade unit onto the jar until it is finger tight.
- Place the mill onto the power unit and turn to lock
- Switch on to maximum speed or use the pulse control.
- After milling, you can replace the blade unit with the sprinkler lid
and shake out your food.
Put the Bowl like this
way, make sure the
mark and the Main
body mark is on the
same way. Then you
can turn the bowl
clockwise, after you
heard a Click, and the
bowl is on the way as
per the right
photo ,the machine
can be assembled
correctly
When finished the
working, you can
turn the bowl out
by anti-clockwise
turning.
