page15/16
Using the simple polarizing set
1.
Simple polarizing includes analyzer and polarizer
2.
Remove the dust cover from the filter slot (M), and insert the analyzer text face up.
3.
Put the polarizer into the condenser slot.
4.
Rotate the polarizer to change the state of polarization.
Using the 0.5x ½ Inch CS/C-mount camera adapter AE.5057 (for trinoculair models
only)
1.
Screw the adapter on your cs/c-mount camera.
2.
Loosen the lock-screw on the trinocular head.
3.
Insert the
camera adapter
into the trinocular port according to the direction of the figure.
Secure the lock-screw tightly.
4.
Focus on a specimen through binocular using your eyes, then observe the image through
camera, if the image is un-sharp, rotate the adjustment tube to focus the image.
Using the SLR camera adapter AE.5527(for trinoculair models only)
1.
Loosen the lock-screw on the trinocular head and remove the dust-cover.
2.
Insert SLR camera adapter to the trinocular. Secure the lock-screw.
3.
Loosen the lock-screw on the photo tube and remove the photo tube.
4.
Insert the photography eyepiece 3.2X to the eyepiece base. Insert and secure the tightly.
5.
Place the T2-ring on the SLR camera adapter (some models come pre-mounted)
6.
Place your camera(without objective lens)
