Euromatic CH-2000E-1 Instruction Manual Download Page 5

5

After Sales Support

 (AU) 1300 886 649  (NZ) 0800 836 761  |       [email protected]

General Safety Instructions (Cont.)

• 

Usage restriction: This appliance is not intended for use by persons (includ-

ing children) with reduced physical, sensory or mental capabilities, or lack 

of experience and knowledge, unless they have been given supervision or 

instruction concerning use of the appliance by a person responsible for their 

safety. 

• 

Children: Supervise children to ensure they do not play with the heater. Close 

supervision is necessary when any appliance is used by or near children. 

•  CAUTION: Hot! 

Some parts of this heater can become very hot during 

use and remain hot for some time afterwards. To avoid burns, do not let 

bare skin touch hot surfaces. Be particularly careful when children and 

vulnerable persons are present. Always let the heater cool down before 

touching it, even if it is unplugged from the power supply.

• 

To ensure personal safety, do NOT install or use this heater: 

•  In front of or immediately below a power point, as the heat it generates 

could damage the electrical installation.

•  Close to a radiant heat source.
•  Behind a door. 
•  On long pile carpet or a flokati rug.
•  Near a window where it may get splashed with rain.
•  Near flammable materials or surfaces (such as furniture, curtains, 

pillows, bedding, papers, clothes), or near open flames. Keep flammable 

materials at least 1m away from the front, sides and rear of the heater. 

•  In an area where petrol, paint or other flammable liquids are stored, e.g. a 

garage or workshop, as the heater has hot and arcing parts inside which 

may spark.

• 

Service: This heater contains no user-serviceable parts inside. Do not 

attempt to open and repair the heater yourself. Other components should 

only be serviced by a qualified technician. All covers are intended to prevent 

direct access to the heating elements and must be in place when the appli-

ance is in use.

• 

Malfunction: In case of malfunction, disconnect the plug immediately and 

contact our after sales support line for advice.

• 

Storage: To avoid damaging the heater during storage or transport, keep 

the heater in a dry place, free from excessive vibration.

• 

Improper use: Improper use or installation may result in the risk of fire, 

electric shock and/or injury. We assume no liability for any eventual 

damages caused by improper use or incorrect handling. 

DANGER: Do not cover!

 This symbol warns you never to cover 

the heater in any manner as it may overheat and become a fire risk. 

Summary of Contents for CH-2000E-1

















Reviews: