Euromate 130321, Manual

Page: 19 / 76

GB
19
Cleaning and maintenance
To clean the Body
– Wipe it with a soft damp cloth.
Installing & removing filters
Filter replace indicator
After operating 4320 hours, the [replace filter] light
will turn on on the display, meaning that it needs to
replace the filter. After replacing the filter, please
press the Power button to reset the indicator light.
Extended press on the Power button can restart the
system.
►
P. 3, item 3
– Open the front cover from the top.
– Remove the 3 in 1 filter by pulling the two strips.
►
P. 4, item 4
– Insert a new 3 in 1 filter into the appliance. Make
sure the new filter is placed in the correct direc-
tion. The strip (12) should be on the top side of the
filter. Wrong direction of filter inserted may dam-
age the appliance.
– Reattach the front cover of the unit and securely
latch into place.
Cleaning & maintaining the 3 in 1 filter
– The air purifier should be cleaned at least once
every month and the outer Activated Carbon Filter
attached to the HEPA Filter should be cleaned
every month by a vacuum cleaner. More frequent
cleaning may be required depending on environ-
mental conditions.
– Clean the filter with the brush attachment of your
vacuum cleaner. This will remove lint and dirt.
Troubleshooting
If something doesn’t work…
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Check
against the following table first before contacting Ser-
vice. You will save yourself a lot of trouble and possi-
bly money too.
If you cannot eliminate the error/fault yourself, please
contact service directly. Please be aware that any
improper repairs will also invalidate the warranty and
additional costs may be incurred.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. Information on returning these items is
available from the seller. Sellers are required to
accept these items free of charge.
Batteries and rechargeable batteries, which
are not permanently installed in waste elec-
trical devices, must be removed prior to dis-
posal and must be disposed of separately.
Lithium batteries and battery packs in all systems
must only be retuned to a collection point when dis-
charged. Batteries must always be protected against
short circuits by covering the poles with adhesive
tape.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
cling.
Note: When the appliance is not in use,
switch it off and unplug it.
DANGER! Risk of injury! Always pull the
mains plug out before commencing any
work on the device.
Note: 3 in 1 filter will last approximately 6
months.
Note: Only the Pre-filter is washable and
make sure the pre-filter is dry when fixing
back the pre-filter to the 3 in 1 filter. The 3 in
1 filter is one filter system. The multiple lay-
ers include: the Pre-filter, Activated Carbon
Filter and HEPA Filter.
DANGER! Risk of injury! Improper repairs
can result in the product functioning
unsafely. This endangers yourself and your
environment.
Insufficient air flow Check that the filters are
clean
Check for any obstruc-
tions in the air inlet and
outlet
Unit will not start Check the power supply
and electric fuses.
Check that the Front Cov-
er is latched firmly and
correctly according to the
instruction.
Check that the Filter is
firmly and correctly
placed.
Excessive noise Check for any foreign ob-
jects in contact with the
fan.
The filter may be clogged
and needed for replace-
ment.
The foam sealing gaskets
have been installed incor-
rectly.
Uneven positioning.