Euromaid IHT60 Installation And Operation Manual Download Page 5

EN

4

• Don’t heat up unopened food containers as 

pressure can build up causing the container to 

burst.

• The surfaces of the stainless steel model 

appliances which are close to the burners may 

change colour because of the excessive heat in 

the course of time.

• Lower electrical hotplates of your hob 

are equipped with advances 

“Induction”

 

technology. You must use your time and 

money saving Induction hob with 

pans that 

are suitable for Induction cooking

 (read 

the section on pan choice); otherwise, your 

appliance will not operate.

Important Safety Information

This appliance is in accordance with 

the recognized state of the art and the 

relevant safety provisions. However, 

proper handling of the appliance is a must in 

order to prevent damages and accidents. Along 

with the following information, please take note 

of further information contained in the text.

WARNING: Immediately switch off the 

appliance from the mains to avoid the 

possibility of an electric shock when a 

crack occurs on the ceramic glass surface 

due to any mechanical impact.

You should refer to your authorized service 

in such a case.

• No alterations or repair attempts, in particular 

using tools (screwdrivers, etc.) may be 

undertaken to or on the appliance. Qualified 

experts who have been specially trained for this 

appliance may only perform repairs, in particular 

to electrical supply parts. Improper repairs 

may lead to serious accidents, damages and 

breakdowns. 

In the event of a breakdown of the appliance, 

(before contacting our customer service 

department), please review the information 

contained under “Warranty terms”. Please call 

our customer services when required.

Natural ventilation is important for the 
correct functioning of the appliance 
and your own safety.

Prolonged intensive use of the appliance may 

call for additional ventilation such as opening 

a window, or the use of permanent fixed 

mechanical ventilation system such as an 

extractor fan or cooker hood that ventilates to 

the outside.

•  Always refer servicing to a qualified 

appliance service engineer.

How to use:

• The glass ceramic hob may only be used for 

the preparation of food items in the domestic 

household. In the event that the appliance is 

misused for another purpose or improperly 

handled, no liability can be assumed for possible 

damages. 

• Do not use the hob to heat the room.

• As soon as a functional disturbance is 

detected or if, e.g. due to extreme mechanical 

effects, cracks appear on the surface of the 

glass ceramic plate, the device must be put out 

of operation immediately: turn off the device and 

disconnect it from the electrical mains network 

(loosen fuses or turn off automatic switches).

• Connection cables of electrical devices should 

not be exposed to hot cooking zones or the 

cookware. Otherwise, the electrical insulation 

may become damaged. 

Summary of Contents for IHT60
























Reviews: