To install the carbon filter:
Place the carbon filter onto the side end of the fan. To place into proper position, match the slot (which is
located around the side of the carbon filter) to the pin on the side of the fan. Turn the filter in an anticlockwise
direction (from “B” to “A” on the left hand side, and from “A to “B” on the right hand side) until a ‘click’ is heard,
to lock into position. Repeat this step to install the remaining carbon filter on the other side of the fan.
Figure 4
Repeat steps (2) to (10) and steps (12) to (15) as described in the above “Installation Procedure – Ducted
System” to install the rangehood.
MAINTENANCE / CLEANING
•
Prior to undertaking any cleaning or maintenance on the rangehood, ensure that the power source is
disconnected.
•
Particular care must be taken with any sharp edges on the rangehood.
•
When cleaning stainless surfaces, use a damp cloth and mild detergent. Never use products containing
abrasives (e.g. scouring pads, steel wool, abrasive liquid cleaner etc.)
•
In high humidity and coastal environments, cleaning should be carried out frequently.
•
Ensure the canopy rangehood is switched off before cleaning.
•
Wipe the rangehood body and flue with mild detergent or soapy water using a sponge or soft cloth. Do not
use oven cleaners, caustic solutions or abrasive materials.
•
Ensure the fan and light switches are switched off before removing and replacing filters. To maintain
efficiency and reduce fire risk, the filters should be cleaned monthly. To clean the filters, soak and agitate
the filters in hot soapy water or washing soda. Rinse, dry well and replace. Do not use oven cleaners,
caustic solutions or corrosive agents.
•
Ensure the fan and light switches are set to ‘Off’ before removing and replacing the light globe. Replace
the globe with a 10 Watt Halogen light globe.
SPECIFICATIONS
MODEL EUC60GS
EUC90GS
EUC90SS EUC91SS
Finish
S/S & Tempered
Glass
S/S & Tempered
Glass
Stainless Steel
Stainless Steel
Width 600mm 900mm 900mm 915mm
Motor
170W 170W 170W 170W
Halogen Lamps
2 x 10W
2 x 10W
4 x 10W
2 x 10W
Air Outlet
∅
150mm
∅
150mm
∅
150mm
∅
150mm
Air Capacity
660m
3
/hr 660m
3
/hr 660m
3
/hr 660m
3
/hr
Exhaust
Pipe
2.0m 2.0m 2.0m 2.0m
Net
Weight
17.0kg 21.0kg 23.5kg 14.0kg
EUROMAID will not be liable in respect of any misuse of this appliance not in accordance with the instructions
and precautions specified in this booklet.
FOR SERVICE AND ENQUIRY, PLEASE CONTACT:
EUROMAID
Electrical Distributors of Australia Pty Ltd
8 / 92A Mona Vale Road, WARRIEWOOD NSW 2102
Tel: (02) 9999 2124
Fax: (02) 9999 1684
