Installation
Fixing the Decorative Telescopic Flue
Arrange the electrical power supply within the dimensions of the
decorative flue.
Prepare the hole in the ceiling or wall for the evacuation of the air.
Fix the upper flue cover to the support bracket with screws (B)
(Fig.4)
Install butterfly flaps into the outlet on the top of the range hood
(C) (Fig.5).
D
Ducted installation -Connect the ductwork to the outlet with a
cable tie or suitable tape. Do not use screws.
Recirculated installation - The air will vent out through the vents
in the top of the telescopic flue. NOTE: A recirculating kit
including carbon filters must be installed for recirculated
installation.
Slide the lower flue cover down into the top of the rangehood.
Some models will require the lower flue cover to be fixed from
underneath using the provided screws (Fig.5)
Fig. 4
Fig. 5
(A)
(B)
(C)
(D)
15
Summary of Contents for CF6BLS
Page 14: ...Installation 14...
