9
English
Technical data
Type
Towel Bars
Supply voltage
Volt/Hz
220-240V / 50Hz
Capacity
Watt
100
Protection class
IP22
Dimensions
cm
3(10) x 53 x 90
Weight
kg
2
General safety instructions
1.
Before using the machine, carefully read this entire instruction
manual.
2.
Before using your new heater, check it, including cord and plug,
for any visible damage
. Do not use a damaged heater, but send it back to your
dealer for replacement.
3.
This device is only suitable for drying textiles.
4.
First fully install the device in accordance with the instructions
before taking it into use.
5.
Under the terms and conditions described in this leaflet, the
heater can be used in wet or damp indoor spaces such as
bathrooms and laundry rooms
. Do not place the heater in the vicinity of taps,
bathtub, shower, pool, fountains or other sources of moisture. Make sure it cannot fall
into water and prevent water from getting into the heater itself. If, at any time, the
heater does fall into water, unplug it immediately! Do not use a heater that has a damp
interior but have it repaired. Never immerse the heater, cord or plug in water and never
touch it with wet hands.
6.
The supply voltage and utility frequency, specified on the
machine, need to match those of the socket that is used.
The
electrical installation needs to be protected by a residual current device (max. 30
mAmp). Only connect the heater to an
earthed
socket!
7.
Fully extend the cord before plugging in the heater. Make sure it
does not come into contact with any part of the heater and
prevent it from heating up any other way
. Do not run the cord underneath
carpeting; do not cover it with mats, carpet strips or similar and make sure it is not
placed in any passageways. Make sure the cord cannot be stepped on and that no
furniture is placed on top of it. Do not lead the cord around sharp corners and do not
roll it up too tightly after use!
8.
If possible, do not use an extension cord, as this poses the risk of
overheating and fire
.