EUROM OK115T, Instruction Booklet

Page: 36 / 52

36
Problems and solutions
Error message E0 (Power supply)

No power even though the switch is
set to ON

Remove plug from socket, press
switch to OFF, remove plug from
socket and press switch to ON.
Error message E1 (photoelectric tube)

No fuel in the tank

Photoelectric tube defective

Incomplete combustion

Photoelectric tube dirty

Fuel filter dirty

Problems with combustion

Fill the tank

Replace it

Use clean fuel

Clean it

Clean it

- Check the wiring from the
ignition
- Clean the sparkplug, adjust it or
replace it.
Error message E2 (Temperature sensor)

Temperature sensor not connected
properly

Defective temperature sensors

Repair the connection

Replace it
Error message E3 (Overheating sensor)

Abnormal internal overheating

Switch off heater and leave to cool.
Then switch on again. If this happens
again, consult your supplier/repair
company.
Error message LO

Temperature is less than -9
o
C

Normal. Wait until temperature rises
to working temperature
Error message HI

Temperature is above 50°C

Normal. Wait until temperature drops
to working temperature
Light flickers

Electrical error

Reset and start again