Technical specifications
OK115T
Capacity
BTU
400.000
kW
117
Connected power
V/Hz
230 / 50
Fuse
A
5
Max. heated area
m³
594
Fuel
Diesel or paraffin
Capacity of fuel tank
l
80
Fuel consumption
l/u
± 10
Air pump pressure
PSI
9
Max. working pressure
per tank
u
8
Dimensions
cm
121,5x68,5x86
Weight
kg
64
Assembly OK115T
This model is supplied with fitted push
bars and an adjustable stand. The
axle with the wheels and the rotating
wheel only need to be fitted under the
stand.
1. wheel support
2. split pin
3. axle
4. support
5. attachment bracket
6. rotating wheel
Slide a wheel onto both ends of the axle. Slide a ring on and secure the wheel
with the split pin. Secure the axle with the wheels by means of the supports on
the wheel support, see diagram.
Secure the rotating wheel over the adjustable stand with the attachment bracket,
see diagram.
Loosening the screws and bolts used to secure the adjustable stand, allows you
to adjust the height of the stand. Set it so that the heater is horizontal. If the
heater is tilted, fuel may leak out or there may be ignition problems.
