15
English
Technical data
Type
EK DELTA 5000
Supply voltage
Volt/Hz
400V / 50Hz (3~)
Maximum capacity
Watt
5000
Settings
Watt
Fan
– 2500 - 5000
Insulation class
IP24
Dimensions
cm
24 x 26 x 40,5
Weight
kg
4,8
General safety instructions
1.
Before using the machine, carefully read this entire
instruction manual.
2.
Before using your new heater, check it, including cord and
plug, for any visible damage
. Do not use a damaged heater, but send it
back to your dealer for replacement.
3.
This heater is exclusively intended to heat workspaces such
as workshops, garages and storage spaces
. Use the appliance for
this purpose only.
4.
Under the terms and conditions described in this leaflet, the
heater can be used in wet or damp indoor spaces such as
bathrooms and laundry rooms
. Do not place the heater in the vicinity of
taps, bathtub, shower, pool, fountains or other sources of moisture
(↔ > 1m.).
Make sure it cannot fall into water, Also make sure that it cannot come into
contact with jets of water, splashes, etc. and prevent water from getting into the
heater itself. If, at any time, the heater does fall into water, unplug it immediately!
Do not use a heater that has a damp interior but have it repaired. Never immerse
the heater, cord or plug in water and never touch it with wet hands.
5.
The supply voltage and utility frequency, specified on the
machine, need to match those of the socket that is used.
The
electrical installation needs to be protected by a residual current device (max. 30
mAmp). Never attempt to find a way round the safety features!Only connect the
heater to an earthed socket!
6.
Fully extend the cord before plugging in the heater. Make
sure it does not come into contact with any part of the heater
and prevent it from heating up any other way.
Do not run the cord
underneath carpeting; do not cover it with mats, carpet strips or similar and make
sure it is not placed in any passageways. Make sure the cord cannot be stepped
