18
2.
Connect the electrical wires of your extension
cord to the terminal block of the fan:
•
Brown wire: live (Figure 8, pos. 3);
•
Yellow green wire: earth (Figure 8, pos. 2);
•
Blue wire: neutral (Figure 8, pos. 1).
3.
Close the connection-box securely.
Figure 8
4.
Mark four holes on the ceiling for the
suspension bracket. Mark the holes on a
sturdy beam or on the concrete.
5.
Check with a wire detector for wires. Make
sure not to hit any wiring when you drill the
holes in the ceiling.
6.
Drill the four marked holes. Use a Ø5 mm drill
bit.
7.
Place the plugs in the four holes
(Figure 9, pos. 1).
8.
Use the Philips screws (Figure 9, pos. 3) and
the rings (Figure 9, pos. 4) to attach the
suspension bracket (Figure 9, pos. 2) to the
ceiling.
Figure 9
9.
Use the side screws (Figure 10, pos. 1) to
attach the fan (Figure 10, pos. 2) to the
suspension bracket.
Figure 10