18
Switching on
Press briefly on the On/Off button and the fan will start operating at a quiet fanning
speed.
Adjusting the fan speed with sufficient battery power
On/Off
button
Fan speed LED lamp
1
LED lamp
2
LED lamp
3
LED lamp
4
Press 1x
Quiet
On
Off
Off
Off
Press 2x
Low
On
On
Off
Off
Press 3x
Medium
On
On
On
Off
Press 4x
High
On
On
On
On
The fan operates with too little battery power
Fan speed
LED lamp 1
LED lamp 2
LED lamp 3
LED lamp 4
Quiet
5x blinking
then off
Off
Off
Off
Low
5x blinking
then off
5x blinking
then off
Off
Off
Medium
5x blinking
then off
5x blinking
then off
5x blinking
then off
Off
High
5x blinking
then off
5x blinking
then off
5x blinking
then off
5x blinking
then off
Switching off
Press 3 seconds on the On/Off button and the fan will switch off immediately,
regardless of the fan speed.
Charging
1.
The Cordless Fan is delivered without a USB mains adapter. Internal battery of
the Cordless Fan can be charged in three different ways:
-
Via 220/240 Volt 50 Hz socket:
Use a USB mains adapter, which is intended for use in a household socket
of 220-240 Volt / 50 Hz and an output voltage of maximum 5 Volt to
produce a charging capacity of maximum 1 Ampere. Never use a mains
adapter with other voltages. The connection voltage and frequency, stated
on the USB mains adapter (not provided), must correspond to those in the
socket that you use and the electrical installation must be equipped with a
residual-current circuit breaker van 30mA.
-
Via a USB A port (5 Volt):
The battery of the Cordless Fan can also be charged by attaching the
charging cable directly to a USB A port.
-
Via a USB car charger (the connection for cigarette lighters):