17
23. Keep the heater clean. Dust, dirt and/or a build up of deposits in the heater are a
common cause of overheating. Make sure these deposits are removed regularly.
24. Do not turn on the appliance if you have discovered damage to the appliance
itself, the cord or the plug, if the appliance is malfunctioning, if it has been
dropped or if there are any other signs of a defect. Return the complete product to
the vendor or to a certified electrician for inspection and/or repair. Always ask for
the original parts.
25. Do not pack the appliance in a box before it has cooled off properly.
26. Do not use attachments and/or accessories that have not been recommended or
supplied by the manufacturer.
27. The appliance (incl. cord and plug) may only be opened and/or repaired by
properly authorised and qualified persons.
28. Only use this heater for its intended purpose and as described in this instruction
manual.
Not abiding by instructions 26, 27 & 28 may lead to damage, fire and/or personal
injuries. A failure to adhere to these rules also immediately nullifies the guarantee
and vendor, importer and/or manufacturer do not take responsibility for any of the
consequences!
Description and Installation
A. Air outlet
B. Indicator lights
C. Display
D. Function button
E. Standby button
F. Control panel
G. Feet
Remove all the packaging material and keep it out of reach of children. After you
remove the packaging, check that the device is not damaged or shows any signs of
error/defect/malfunction. In case of doubt, do not use the device, but contact your
supplier for inspection/replacement.
Do not use the heater
before you have installed it according to the following instructions!
Select a suitable place for the heater, at least one metre away from all obstructions,
walls and flammable materials (also see the safety requirements).
Attach the separately supplied feet under the heater (see diagram):
Turn the heater over, bottom side up. Place it on a cloth or soft surface to prevent
damage.
Position the feet on the bottom so that the screw holes line up.
Use the supplied self-tapping screws (2x2) to firmly attach the feet to the heater.
