16
Installation
The device is packed in one box. Remove all packaging material and check that the device is
not damaged. Do not use the device if it is damaged, but always contact your supplier. Keep
the packaging for safe storage and transport.
Hardware included:
•
Key bolt with hanging eye;
•
standard chain (50 cm) with screw locking and ring;
•
additional security chain (30 cm);
•
2 karabiner hooks;
•
3 tie wraps.
Mounting
WARNING
The ceiling or frame used for mounting must be made from flame-retardant or
nonflammable material. And should withstand a temperature of 150 °C.
1.
Place the device with a minimum distance
(Figure 6) of:
•
50 cm to a nonflammable ceiling or roof;
•
50 cm to the side walls;
•
180 cm from the floor.
2.
Do not mount the device immediately below
a socket outlet.
The device can be attached:
•
to the ceiling;
•
on a frame.
Figure 6
Hanging on the ceiling
CAUTION
Make sure to use suitable fastening materials depending on the surface. The
provided anchor bolts are suitable for a concrete ceiling.
