130
EN
whitish stains remains on dishes and
dishes do not dry and washed clean. If
rinse aid dosage setting set too height,
you can see bluish layers on glass and
dishes.
Filling the rinse-aid and setting
To
fi
ll the rinse aid compartment, open
the rinse-aid compartment cap. Fill the
compartment with rinse aid to the MAX
level and then close the cap. Be careful
not to over
fi
ll the rinse aid compartment
and wipe up any spills.
In order to change the rinse aid level,
follow the below steps:
• Open the door of the machine.
• Turn on the machine, and press the
Programme button as soon as the
machine is turned on.
• Hold down the Programme button until
all leds blink twice. Rinse aid setting
follows water hardness setting.
• The machine will display the last
setting.
• Change the level by pressing the
programme button.
• Switch o
ff
the machine to save the
setting.
The factory rinse aid level setting is “4”.
If the dishes are not drying properly or
are spotted, increase the level. If blue
stains form on your dishes, decrease
the level.
Level
Brightener
Dose Indicator
1
Rinse-aid not
dispensed
r1 is shown on the
display.
2
1 dose is dis-
pensed
r2 is shown on the
display.
3
2 doses are
dispensed
r3 is shown on the
display.
4
3 doses dis-
pensed
r4 is shown on the
display.
5
4 doses dis-
pensed
r5 is shown on the
display.
