EN
133
The installation and repairing proce-
dures should always carried out by the
Authorised Service Agent in order to
avoid possible risks. The manufacturer
shall not be held liable for damages that
may arise from procedures carried out
by unauthorised persons. Repairs may
be carried out by technicians only. If a
component has to be replaced, ensure
that only original spare parts are used.
Improper repairs or use of non-original
spare parts may cause considerable
damage and put the user at consider-
able risk.
Contact information for your customer
service can be found on the back of this
document.
Function-relevant genuine spare parts
according to the corresponding Ecode-
sign order can be obtained from Cus-
tomer Service for a period of at least 10
years from the date on which your ap-
pliance was placed on the market within
the European Economic Area.
If any of the program lights are on
and the Start / Pause button light is
on and o
ff
:
The dishwasher door is open; close it.
If the programme won't start
• Check if the plug is connected.
• Check your indoor fuses.
• Be sure that the water inlet tap is
turned on.
• Be sure that you have closed the
machine door.
• Be sure that you switched o
ff
the
machine by pressing the Power On /
O
ff
button.
• Be sure that the water inlet
fi
lter and
the machine
fi
lters are not clogged.
If the control lamps do not go out
after the end of the washing program:
The On / O
ff
button is not released
If detergent residues are left in the
detergent compartment
• Detergent has been added when the
detergent compartment was wet.
If water is left inside the machine at
the end of the programme
• The water drain hose is clogged or
twisted.
• The
fi
lters are clogged.
• The programme is not
fi
nished yet.
If the machine stops during a wash
operation
• Power failure.
• Water inlet failure.
• Program can be on standby mode.
If shaking and hitting noises are
heard during a wash operation
• Dishes placed incorrectly.
• Spray arm hitting the dishes.
If there are partial food wastes left on
the dishes
• Dishes placed incorrectly into the
machine, sprayed water did not reach
related places.
• Basket overly loaded.
• Dishes leaning against one another.
• Very small amount of detergent
added.
• An unsuitable, rather weak wash
programme selected.
• Spray arm clogged with food wastes.
• Filters clogged.
• Filters incorrectly
fi
tted.
• Water drain pump clogged.
