EN
95
2.3 Electrical Connection and
Safety
WARNING:
The electrical connec-
tion of this appliance should be car-
ried out by an authorised service person
or quali
fi
ed electrician, according to the
instructions in this guide and in compli-
ance with the current local regulations.
WARNING: THE APPLIANCE
MUST BE EARTHED.
• Before connecting the appliance to
the power supply, the voltage rating
of the appliance (stamped on the
appliance identi
fi
cation plate) must
be checked for correspondence to the
available mains supply voltage, and
the mains electric wiring should be
capable of handling the appliance’s
power rating (also indicated on the
identi
fi
cation plate).
• During installation, please ensure
that isolated cables are used. An
incorrect connection could damage
your appliance. If the mains cable is
damaged and needs to be replaced
this should be done by a quali
fi
ed
person.
• Do not use adaptors, multiple sockets
and/or extension leads.
• The supply cord should be kept away
from hot parts of the appliance and
must not be bent or compressed.
Otherwise the cord may be damaged,
causing a short circuit.
• If the appliance is not connected
to the mains with a plug, a all-pole
disconnector switch (with at least 3
mm contact spacing) must be used in
order to meet the safety regulations.
• The fused switch must be easily
accessible once the appliance has
been installed.
• Ensure all connections are adequately
tightened.
• Fix the supply cable in the cable
clamp and then close the cover.
• The terminal box connection is placed
on the terminal box.
A supply cable 3 x 2.5 mm
2
, HO5V V-F,
must be used. The ground wire must be
connected to the screw marked with the
symbol .
4
4
N
N
PE
PE
L2
L3
L1
L
5
5
3
3
2
2
1
1
