Eurolux DW10VEE-A++AA-8, User Manual, Page: 111 / 129

• When the conditions of use of such products and the machine settings are appropriate,
they ensure savings in salt and/or rinse aid consumption.
• Contact the detergent manufacturers if you are not obtaining good wash results (if your
dishes stay calcareous and wet) after having used 2 in 1 or 3 in 1 detergents. The scope of
warranty for your machine does not cover any complaints caused by the use of these types
of detergents.
Solubility of the tablet detergents produceddib
ff
yerentcompanies can vary
depending on the temperature and time. Therefore, it is not recommended to use such
detergents in short programs. It is more suitable to use powder detergents in such
programs.
Should any problem, which you have not encountered before, arise with the use of
this type of detergents, contact the detergent manufacturers directly.
• Fill the salt and rinse aid compartments.
• Adjust the water hardness setting to the highest position ( 6 ) and run an empty-wash.
• Adjust the water hardness level.
• Make the suitable rinse aid setting.
Rinse aid is used to prevent the stay of white water drops, lime
stains, white
film
strip-shaped stains that may form on the
dishes, as well as to increase the drying performance. Contrary
to the popular beliefs, it is used not only for obtaining shinier
dishes but also for obtaininsug
fficientlydried
dishes. For this
reason, care should be taken that there is adequate amount of
rinse aid in the rinse aid compartment and only polishing material
produced for use at dishwashers should be used.
If the rinse aid lamp on the control panel becomes on
fill
the rinse
aid compartment with rinse.
while a light indicator a shows that you need to
fill
the compartment with rinse aid.
The rinse aid level adjuster can be set to a position between 1 and 6. Factory setting for rinse
aid is the position 3. You need to increase the degree of the adjuster if water stains form on
your dishes after a wash, whereas you need to decrease the degree if a blue stain is left when
wiped by hand. 3
Use only those rinse aid materials which are allowed for use in the machine. As
rinse aid residues left as a result of
overflowing
will create extremely high aom
ffo
oaum nts
and thus reduce the washing performance, remove the excess amount of rinse aid by wiping it
with a rag
Warning:
When you give up using combined detergents
Filling with rinse aid and making the setting
Warning: