manualshive.com logo in svg

EUROLOGIC SANbloc MAN-FC2000-RAID, Installation Manual

Share
Download
EUROLOGIC SANbloc MAN-FC2000-RAID Installation Manual Download Page 9

Audience

9

Preface

This Installation Guide describes the installation and 

operation of the SANbloc Series. The following products are 

covered: SANbloc FC2100 Series (JBOD) and SANbloc 

FC2500 Series (RAID).

Audience

This Installation Guide is intended for use by the person 

installing and operating the SANbloc Series. This Instal-

lation Guide describes the operation of the SANbloc Series 

only. For details relating to the host system, refer to the 

documentation supplied with the host system.

Conventions Used In This User Guide

The following conventions are used throughout this Instal-

lation Guide.

Note: A NOTE gives general information, such as helpful tips 
and references to related information.

CAUTION: A CAUTION means take care. There is a risk of caus-
ing damage to the equipment or losing data.

WARNING: A WARNING means beware. There is a risk of elec-
tric shock or personal injury. Before working on the Storage Array 
be aware of the hazards that exist.

Summary of Contents for SANbloc MAN-FC2000-RAID



































Reviews:

No comments

Brands by name

Popular brands

Load more brands