00092402.DOC, Version 1.1
45/55
Last clear - individual fixture running time
This function allows the operator to record the operating hours of the device, according to his requirements.
You can use the counter to document the operating hours since the last service, for example, or to document
the operating hours from a rental. Individual operating hours can be reset at any time. The display shows
“XXXX”; “X” stands for the number of hours.
Timer PIN
Use this function to enter the password to clear the individual fixture running time. The password is
„066“.
Clear individual fixture running time
With the function
“Clear last”,
you can clear the individual running time of the device (last run time). Please
enter the password under "Timer PIN" first.
Head Temperature
With this function, you can display the temperature in the head in degree Celsius/degree Fahrenheit.
Error information
With this function, you can display error messages.
Model information
Within this function, you can display the type designation.
Software version
With this function, you can display the software version of the device.
Test
Reset
With this function you can reset the device via the Control Board.
Test function of each channel
With this function you can test each channel on its (correct) function.
Manual control
With this function, you can adjust each channel manually.
Calibration
With this function, you can calibrate PAN and TILT to their correct positions. The password for this function is
„066“.
Program
Select program for auto program
With this function, you can select the program for the Program Run.
Edit program
With this function, you can edit the internal programs.
Edit scenes
With this function, you can edit the scenes of the internal programs.
Rec. Controller
The device features an integrated DMX-recorder by which you can transmit the programmed scenes from
your DMX-controller to the device. Adjust the desired scene numbers by pressing Up or Down (from – to).
When you call up the scenes at your controller, they will automatically be transmitted to the device.
