00110564, Version 1.0
26/36
Stand-alone mode
Automatic mode
In automatic mode, 5 show programs are available that run at an adjustable speed.
1 Press the
MENU
button so many times until
Auto
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to select the desired show program. Confirm with the
ENTER
button.
2 Press the
MENU
button so many times until
SPEE
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to adjust the running speed of the program from
SP 1
(slow) to
SP 9
(fast). Confirm with the
ENTER
button.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the
MENU
button so many times until
Soun
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to select the desired show program. Confirm with the
ENTER
button.
2 Press the
MENU
button so many times until
SEnS
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to Adjust the microphone sensitivity to the volume of the music
(
SE 1
= low,
SE 9
= high).
3 If you enable the silent scene mode (
on
setting) in menu item
SILE
,
the LEDs will be switched off if the
volume is too low or if there is no sufficient bass beat. If you disable this mode (
off
setting) the LEDs
remain on during periods without music.
Preset colors
In the
Stat
mode the device will constantly emit one of 17 preset colors.
1
Press the
MENU
button so many times until
Stat
is indicated in the display. Confirm with the
ENTER
button.
2
Use the buttons
UP
and
DOWN
to adjust the desired color. Confirm with the
ENTER
button.
Individual color mix
In the color mode
Colo
each of the three-color LEDs can be individually adjusted for brightness. The device
will constantly emit the color adjusted.
1
Press the
MENU
so many times until
Colo
is indicated in the display. Confirm with the
ENTER
button.
2
Now the display indicates the letter
R
for the color and the corresponding brightness value. Use the
buttons
UP
and
DOWN
to adjust the desired brightness.
3
Confirm with the
ENTER
button. Now the color green can be adjusted and then blue.
Total brightness
Menu
diMM
allows adjusting the total brightness for all stand-alone operating modes: Stat, Auto, Soun, Colo.
1 Press the
MENU
button so many times until
diMM
is indicated in the display. Confirm with the
ENTER
button.
2 Use the buttons
UP
and
DOWN
to adjust the desired brightness (
dI 1
= dark,
dI 9
= bright). Confirm with
the
ENTER
button.
