00095594, Version 1.2
27/28
CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Open the fuse-holder on the rear panel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuse-holder.
Step 3:
Install the new fuse in the fuse-holder.
Step 4:
Replace the fuse-holder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
100-240 V AC, 50/60 Hz
Power consumption:
20 W
Number of DMX channels:
4/8
DMX512 connection:
3-pin XLR
Sound-control:
via built-in microphone
Maximum ambient temperature
T
a
:
45° C
Maximum housing temperature
T
C
:
60° C
Min. distance from flammable surfaces: 0.5 m
Min. distance to lighted object:
0.1 m
Fuse:
T 1 A, 250V
LED type:
3 W
Number of 10mm LEDs:
5 TCL, 1 UV
Beam angle:
11°
Dimensions (WxDxH):
230 x 110 x 230 mm
Weight:
1 kg