00095594, Version 1.2
24/28
C5
Red + Green
C6
Red + Blue
C7
Red + UV
C8
Green + Blue
C9
Green + UV
C10
Blue + UV
C11
Red + Green + Blue
C12
Red + Green + UV
C13
Red + Blue + UV
C14
Green + Blue + UV
C15
Red + Green + Blue + UV
Dimming
dim 1 – dim9
0-100% for Auto mode, Sound mode and Color
presets
DMX-CONTROLLED OPERATION
You can control the devices individually via your DMX-controller.
DMX-Mode
The device has two different DMX channel modes. The Control Board allows you, as described below, to
assign the DMX channel mode.
Addressing
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the device will respond to the controller.
Press the MODE button until the display shows “
Addr”.
Press ENTER to confirm.
Select the desired DMX Channel Mode 4CH/8CH and again press ENTER to confirm.
You can now set the desired address via the UP or DOWN buttons. Press ENTER once again to confirm.
Press the MODE button in order to return to the main menu.
Please, be sure that you don’t have any overlapping channels in order to control each device correctly and
independently from any other fixture on the DMX-chain.
If several devices are addressed similarly, they will work synchronically.
Controlling:
After having addressed the LED SLS-603 TCL + UV Floor, you may now start operating it via your lighting
controller.