00042289.DOC, Version 1.0
22/28
OPERATION
The device has two operating modes. It can be operated via the Control Board or it can be run in DMX-
controlled mode via a DMX controller.
After you connected the effect to the mains, the LED EXT-Blinder starts running.
Stand Alone operation
In the Stand Alone mode, the LED EXT-Blinder can be used without controller. Disconnect the LED EXT-
Blinder from the controller and call the internal program.
Please refer to the instructions under Control Board.
Control Board
The Control Board offers several features: you can e. g. simply set the starting address.
Enter the menu by pressing the Menu-button. You can change the selection by pressing Up or Down.
Confirm every selection by pressing the Set-button. You can leave every mode by pressing the Menu-button.
The functions provided are described in the following sections.
After you connected the effect to the mains, the display shortly indicates "A001" followed by:
Main menu
Display
Function
Addr
A001-A512
With this function, you can
adjust
the desired
DMX
512 address
via the Control Board.
Auto
At.01-At.08
In the Stand Alone mode, the device can be used
without controller. Disconnect the device from the
controller and call up the
internal programs
. At.08 is
editable (Please refer to the instructions under main
menu Edit)
Modi
Mod1-Mod 5
Adjust DMX channel mode
With this function, you can adjust the DMX channel
mode. The device features 5 different DMX channel
modes.
Mod1 – 3 channel mode
Mod2 – 5 channel mode
Mod3 – 8 channel mode
Mod4 – 8 channel mode
Mod5 – 15 channel mode
Edit
Sc.01 -Sc.29,
Edit
the
scenes
of the internal program At.08
r.001-r.255 (red)
g.001-g.255 (green)
b.001-b.255 (blue)
f.001-f.255 (flash)
D.001-D.255 (DIMMER)
Sped
s.001-s.255
This function is only valuable for the internal program
At.08 (s. Auto function).
Mast
Off/On
Select
On
:
Automatic program mode
when there is
no DMX signal and that the device is
defined as
master
.
Select
Off
:
Automatic program mode
when there is
no DMX signal and that the device is
defined as
master
. The device can receive the DMX-512 signal.
