8
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off
until it has reached room temperature.
Never let the power-cord come into contact with other cables! Handle the power-cord and all connections
with the mains with particular caution!
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the
power-cord from time to time.
Always disconnect from the mains, when the device is not in use or before cleaning it.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
Keep away children and amateurs!
OPERATING DETERMINATIONS
This device is a mirrorball motor for turning mirrorballs up to a maximum diameter of 100 cm. The maximum
charge of the whole installation must not exceed 40 kg.
This product is only allowed to be operated with an alternating voltage of 230 V, 50 Hz and was designed for
indoor use only.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
Please use the original packaging if the device is to be transported.
If this mirrorball motor will be operated in any way different to the one described in this manual, the product
may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to
dangers like short-circuit, burns, electric shock, crash etc.
DESCRIPTION OF THE DEVICE
Features
Mirror ball motor
Suitable for driving mirror balls up to a maximum weight of 40 kg • This weight corresponds with a diameter
of 100 cm for the EUROLITE mirror balls • The maximum load always means the mirror ball weight including
the mirror ball chain, the safety chain and the fixation material (e.g. screw-on chain link) • 3 rotations per
minute • Delivered with IEC power supply cable • For professional use, e.g. in discotheques and in public
places, the EN DIN 15560 norms have to be considered • The motor always has to be installed with a
secondary safety attachment • Before taking into operation for the first time, the installation has to be
approved by an expert
Safety features
• Rugged construction with steel housing for long operation
• High stability due to massive motor axle
• Mechanic fall safety against axle loosening inside the motor
• Approved load with 10-fold testing weight
• Additional attechment eyelet for secondary attachment of the load
• EUROLITE safety rotary motors comply with the safety norm EN 292 and safety regulation BGV C1
(Germany)
• Quality management for testing every production charge
