00085409.DOC, Version 1.0
19/19
DMX-Protocol
Rotation direction and speed
Channel:
Value:
Function:
1
000 - 000
No rotation
001 - 127
Decreasing clockwise rotation
128 - 128
No rotation
129 - 255
Increasing counter-clockwise rotation
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
If the fuse interrupts, please reset the breaker.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by authorized dealers only in
order to avoid hazards.
If defective, please dispose of the unusable device in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
13 W
Max. load WLL (4-fold):
30 kg
Max. load BGV C1 (8-fold):
15 kg
Max. load BGV C1 (10-fold):
12 kg
Max. load BGV C1 (12-fold):
10 kg
Max. diameter of mirror ball:
50 cm (EUROLITE)
Rotation-speed:
up to 5 RPM
Dimensions (LxWxH):
230 x 222 x 140 mm
Weight:
3 kg
Please note: All information is subject to change without prior notice. 27.08.2014 ©