EuroLite LED WMB-830 RGB Bar, User Manual

Page: 24 / 28

51930310_V_1_0.DOC 24/28
control-channel 3
Mode DMX-value Characteristic
1-4 0-255 green
5-6 0-255 brightness
control-channel 4
Mode DMX-value Characteristic
1-4 0-255 blue
5 0-255 speed
control-channel 5
Mode DMX-value Characteristic
1-4 0-255 dimmer
control-channel 6
Mode DMX-value Characteristic
1-3 0-255 red
control-channel 7
Mode DMX-value Characteristic
1-3 0-255 green
control-channel 8
Mode DMX-value Characteristic
1-3 0-255 blue
ontrol-channel 9
Mode DMX-value Characteristic
1-3 0-255 dimmer
Mode
1 etc. until control-channel 33
2 etc. until control-channel 17
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.