00121304, Version 1.1
25/32
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the
MENU
button so many times until
Soud
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to select the desired show program
So 1-4
. Confirm with the
ENTER
button.
2 Use the buttons
UP
and
DOWN
to adjust the microphone sensitivity to the volume of the music (
sen 1
=
low,
sen 9
= high). Confirm with the
ENTER
button.
Interconnecting several devices (master/slave operation)
Several devices may be interconnected (max. 32). Then all slave units can be synchronized and controlled
with the master unit without the need for a DMX controller.
The devices must be set to the corresponding
operating modes.
1 Configure all slave units before connecting the master unit: Press the
MENU
button so many times until
SLAV
is indicated in the display. Confirm with the
ENTER
button.
2 Connect the DMX output of the master unit to the DMX input of the first slave unit. Then connect the
DMX output of the first slave unit to the DMX input of the second slave unit, etc. until all units have been
connected in a chain. Make sure the master unit is the first in the chain. Do not connect a DMX controller
to the DMX input of the master unit.
3 Set the master unit to the desired operating mode. The interconnected devices will now operate in sync.
Individual color mix
In the color mode
Colo
each color can be individually adjusted for brightness. The device will constantly emit
the adjusted color.
1
Press the
MENU
so many times until
Colo
is indicated in the display. Confirm with the
ENTER
button.
2
Now the display indicates the letter
r
for the color and the corresponding brightness value. Use the
buttons
UP
and
DOWN
to adjust the desired brightness. Confirm with the
ENTER
button. Now the color
green can be adjusted; then blue, warm white and cold white.
3
Select the desired color with the
ENTER
button.
4
The setting of the strobe effect for the cold white LEDs is the final menu item. Use the buttons
UP
and
DOWN
to select the desired flash frequency from
St 1
(slow) to
St 9
(fast). When set to
St 0
, the strobe
effect is disabled. Confirm with the
ENTER
button.
Preset colors
In the
StAt
mode, the device will constantly emit one of 10 preset colors.
1
Press the
MENU
button so many times until
StAt
is indicated in the display. Confirm with the
ENTER
button.
2
Use the buttons
UP
and
DOWN
to adjust the desired color
CL 02-11
. When
CL 01
is selected, the LEDs
are switched off. Confirm with the
ENTER
button.
Information
The display can indicate the software version.
1 Press the
MENU
button so many times until
Info
is indicated in the display. Confirm with the
ENTER
button. The display indicates
Ver
.
2 Confirm again with the
ENTER
button. Now the display shows the current software version.
Direction specification
In
dir
mode you can set the running direction for the internal programs “Shou“ and ”Soud“.
1
Press the
MENU
button so many times until
dir
is indicated in the display. Press
ENTER
to confirm.
2 Select the desired running direction with the
UP
and
DOWN
buttons. Confirm with the
ENTER
button.
Summary of Contents for LED STP-14
Page 1: ......
Page 2: ...00121304 Version 1 1 2 32...
