00121304, Version 1.1
24/32
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller.
Menu structure
Mode
Display
Function
DMX mode
Addr
37CH
d001-476
37-
channel mode and start address
34CH
d001-479
34-
channel mode and start address
6CH
d001-507
6-
channel mode and start address
2CH
d001-511
2-
channel mode and start address
Automatic mode
Shou
Sh 1-7
Show program 1-7
Sp 1-9
Program running speed 1-9
slow > fast
St 0-9
Strobe effect 0-9
slow > fast
Sound control
Soud
So1-4
Show program 1-4
Sen 1-9
Microphone sensitivity
low > high
Slave mode
SLAV
Slave
Slave mode
Individual color mix
Colo
r000-255
Red
g000-255
Green
b000-255
Blue
U000-255
Warm white LEDs
S000-255
Cold white LEDs
St 0 – St 9
Cold white LEDs: strobe effect
slow > fast
Preset colors
StAt
CL01-CL11
Constant lighting in one of 10 colors
CL02-11; LEDs off: CL01
Information
Info
Ver
VVxx
Software version
Direction specification for
automatic and sound control
mode
dir
Direction of internal programs “Shou“
and “Soud“ from left to right
Direction of internal programs ”Shou“
and “Soud“ from right to left
Stand-alone mode
Automatic mode
In automatic mode, 7 show programs are available that run at an adjustable speed.
1 Press the
MENU
button so many times until
Shou
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to select the desired show program
Sh1-7
.
2 Use the buttons
UP
and
DOWN
to adjust the running speed of the program from
SP 1
(slow) to
SP 9
(fast). Confirm with the
ENTER
button.
3 The setting of the strobe effect is the final menu item. Use the buttons
UP
and
DOWN
to select the
desired flash frequency from
St 1
(slow) to
St 9
(fast). When set to
St 0
, the strobe effect is disabled.
Confirm with the
ENTER
button.
Summary of Contents for LED STP-14
Page 1: ......
Page 2: ...00121304 Version 1 1 2 32...