EuroLite LED KLS, User Manual

Page: 33 / 44

www.eurolite.de
33
7
OPERATION
The built-in control panel of the unit features four operating buttons and a display which shows all operation
statuses. After connecting the unit to the mains it requires a short initialization process and is then ready for
operation. The display shortly indicates the firmware version followed by the last operating mode. The light
set may be controlled via IR remote control, foot switch or a DMX controller. The operating modes can be
selected by means of the display and the control buttons.
►
Operating Buttons
MENU Selects the operating mode or returns to the initial screen.
ENTER Activates a value to be modified or saves a value when modifying.
UP
Selects the next menu item or increases values when modifying.
DOWN Selects the previous menu item or decreases values when modifying.
►
Menu Structure
Operating Mode Programming Levels Function
Automatic Mode
Derbies and Spots
AP** AP01—AP18 Show program 1-18
S.01 — S.99
Running speed slow
→
fast
M.00 — M.99
Rotation (Derbies) slow
→
fast
Laser
AL** AL01—AL06 Show program 1-6
S.01 — S.99
Running speed slow
→
fast
M.00 — M.99
Rotation slow
→
fast
Strobe LEDs
AF** AF01—AF10 Show program 1-10
S.01 — S.99
Running speed slow
→
fast
Derbies, Spots,
Laser and
Strobe LEDs
AM**
AM01—AM03 Show program 1-3
S.01 — S.99
Running speed slow
→
fast
Sound Control
Derbies and Spots SP** SP01—SP18 Show program 1-18
Laser SL** SL01—SL06 Show program 1-6
Strobe LEDs SF** SF01—SF10 Show program 1-10
Derbies, Spots,
Laser and Strobe LEDs
SM** SM01
—
SM03
Show program 1-3
Color Mode
Derbies, Spots and
Strobe LEDs
COLO
R.000—R.255 Red 0-255
G.000—G.255
Green 0-255
B.000—B.255
Blue 0-255
S.00 —S.99
Strobe effect slow
→
fast
DMX Mode
Channel Mode
d***
03CH 3 channels
05CH 5 channels
09CH 9 channels
27CH 27 channels
Start Address d*** d001—d*** Start address
Master/Slave Mode
Mode
SLAV
Slave mode
Notes : (1) Approx. 30 seconds after pressing the last button, the setting menu is automatically exited.
(2) SLAV or d*** modes: If no control signals are available, the display will be flashing.
(3) While menu AP, AL, AF, AM, SP, SL, SF or SM is selected, all LEDs and the laser are switched off; in
the sub menus they will be switched on again.