00056674.DOC, Version 1.2
31/32
8.1 Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
9. TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
100 W
DMX512 connection:
3-pin XLR
Number of DMX channels:
15
Number of LEDs:
720 (240 x red, 240 x green, 240 x blue)
Type of LEDs:
10 mm
TV spigot:
D = 28 mm
Beam angle:
25°
Sound control:
via built-in microphone
Maximum ambient temperature
T
a
:
45° C
Maximum housing temperature
T
B
(steady state): 60° C
Min. distance from flammable surfaces:
0.50 m
Min. distance to lighted object:
0.10 m
Dimensions (LxWxH):
1200 x 55 x 310 mm
Weight:
8.5 kg
9.1 Accessories
EUROLITE FP-1 Foot pedal
Item no. 42109710
EUROLITE STV-40A Lighting stand, alu
Item no. 59007001
EUROLITE STV-40-WOT Lighting st.no T-bar
Item no. 59007002
EUROLITE STV-40S-WOT Lighting st.no T-bar
Item no. 59007004
EUROLITE DMX LED Operator 4
Item no. 70064504
EUROLITE DMX LED Operator IR RC Item no. 70064512
Please note: Every information is subject to change without prior notice. 14.09.2011 ©
