00062105, Version 1.2
25/26
33
164-168
Color change1
34
169-173
Color change 2
35
174-179
Color change 3
36
180-184
Color change 4
37
185-189
Color change 5
38
190-194
Color change 6
39
195-200
Color change 7
40
201-205
Color change 8
41
206-209
Color change 9
42
210-214
Color change 10
43
215-219
Color change 11
44
220-224
Color change 12
45
225-230
Color change 13
46
231-235
Color change 14
47
236-240
Color change 15
48
241-245
Color change 16
49 246-255 Sound
active
Sensitivity
32-255
(increasing)
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Open the fuseholder on the rear panel with a fitting screwdriver.
