00064317.DOC, Version 1.0
28/34
7.2 Remote control with the foot pedal FP-1
The foot pedal available as accessory allows convenient control of the light set.
1
Press pedal 1
PRESETS
repeatedly for the desired function. One in seven preset colors or color
change and color fade of the colors can be selected.
Number
Function
1
white
2
red
3
green
4
blue
5
amber
6
white
7
yellow
8
purple
9
cyan
10
amber & white
11
color change every second
12
color fade every 3 seconds
2
Press pedal 2
SOUND CONTROL
to select sound control.
3
Press pedal 3
FREEZE
to select the freeze function. Then the current color is kept.
4
Press pedal 4
BLACK OUT
to switch off all LEDs.
5
After switching the light set off and on again, the function selected last is activated.
7.3 Operation via DMX controller
For operation with a controller with DMX512 protocol, the light set is equipped with 23 control channels.
Setting the DMX starting address and selecting the DMX operating mode
To be able to operate the light set with a DMX controller, the DMX starting address must be set for the first
DMX channel. For this press the button
MENU
so many times until
is indicated in the display. Then
use the buttons
UP
and
DOWN
to set the address.
As soon as the light sets receives DMX control signals, the red DMX indicator lights up in the display
and the set can be operated with the DMX controller.
Note:
The starting address depends upon which DMX controller is being used. Please refer to the
controller's documentation.
