00075178.DOC, Version 1.0
28/32
Master/slave operation with several light sets
1
When several light sets are interconnected (
6.3), the slave units can be synchronized and controlled
with the master unit. For this select the desired operating mode (music control or automatic mode) at
the master unit and set each slave unit to the same DMX starting address:
(
7.3). The
interconnected light sets will now operate in sync.
2
When the master unit is to be controlled with the foot pedal FP-1, also set each slave unit to the DMX
starting address
. The interconnected light sets can then be operated in sync with the foot pedal.
7.2 Remote control with the foot pedal FP-1
The foot pedal available as accessory allows convenient control of the light set.
1
Press pedal 1 [
PRESETS
] repeatedly for the desired function. One in seven preset colors or color
change and color fade of the colors can be selected.
Number
Function
1 white
2 red
3 green
4 blue
5 yellow
6 purple
7 cyan
8
color change every second
9
color fade every 3 seconds
2
Press pedal 2 [
SOUND CONTROL
] to select sound control.
3
Press pedal 3 [
FREEZE
] to select the freeze function. Then the current color is kept.
4
Press pedal 4 [
BLACK OUT
] to switch off all LEDs.
7.3 Operation via DMX controller
For operation with a controller with DMX512 protocol, the light set is equipped with 15 control channels.
Setting the DMX starting address and selecting the DMX operating mode
To be able to operate the light set with a DMX controller, the DMX starting address must be set for the first
DMX channel. For this press the button [
MENU
] so many times until the menu item
is indicated in the
display. Then use the buttons [
▲
] and [
▼
] to set the address.
As soon as the light sets receives DMX control signals, the red DMX indicator lights up in the display
and the set can be operated with the DMX controller.
Note:
The starting address depends upon which DMX controller is being used. Please refer to the controller's
documentation. For operation with the DMX control panel DMX LED Operator 4 or the infrared system DMX LED
Operator IR2DMX adjust the DMX starting address 021.
