00075178.DOC, Version 1.0
26/32
6.3 Interconnecting several light sets (master/slave operation)
Several light sets may be interconnected. Then all slave units can be synchronized and controlled with the
master unit.
1
Connect the jack DMX OUT of the master unit via a 3-pin XLR cable to the jack DMX IN of the first
slave unit.
2
Then connect the jack DMX OUT of the first slave unit to the jack DMX IN of the second slave unit, etc.
until all units have been connected in a chain.
6.4 Connection to the foot pedal FP-1
Connect the connection plug of the foot pedal to the jack FOOT PEDAL on the control unit.
