00052078.DOC, Version 1.0
13/16
DESCRIPTION OF THE DEVICE
Safety rope
Microphone
Fuse:
F 1 A, 250 V
Sensitivity
Vor Gebrauch Anleitung lesen. Niemals direkt in die Lichtquelle
blicken (gilt speziell für Epileptiker)! Gerät vor Feuchtigkeit und
Nässe schützen! Niemals das Gerät öffnen! Im Geräteinnern
befinden sich keine zu wartenden Teile. Wartungs- und
Servicearbeiten nur durch autorisierten Fachhandel!
Read user manual before use. Never look directly into the light
source (especially meant for epileptics)! Keep away from rain and
moisture! Never open the housing! There are no serviceable parts
inside the device. Maintenance and service operations only by
authorized dealers.
Type: LED D-40 TCL 2x9 W
Power supply: 230 V AC, 50 Hz ~
Power consumption: 60 W
Fuse: F 1 A, 250 V
Number of LEDs: 2 x 9 W TCL
T
B
=50° C
MADE IN CHINA
FF
0.1 m
T
a
=45° C
www.eurolite.de
1. Safety rope
2. Microphone
3. Fuse
4. Earth
5. Sensitivity
6. Power supply
INSTALLATION
Overhead rigging
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
Procedure:
The device should be installed outside areas where persons may walk by or be seated.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to)
calculating working load limits, installation material being used, and periodic safety inspection of all
installation material and the device. If you lack these qualifications, do not attempt the installation yourself,
but instead use a professional structural rigger. Improper installation can result in bodily injury and or
damage to property.
The device has to be installed out of the reach of people.
