EuroLite LED BC-6, User Manual

Page: 22 / 28

00077416, Version 1.2 21/23
08 R-R-G-Y-B-W, color change
09 RRBW-BWY-RRGY-RRBY, color change
10 GY-BW-RRGY-RRBW-GBYW-RRGBWY-
RR, color change
11 RR-RRGY-RRGBYW-BYW-BW-Blackout,
color fade
12 Endless loop: Strobe, static light, color
change, color fade
Sound Control Mode
Press the MODE button to select sound control mode. When the Control Board shows S011 , you can select
the desired internal program via the UP or DOWN buttons (see following graphic).
By pressing the SPEED button you can set the speed of the step motor.
Please press the MODE button to attain the main menu.
Program: Function:
01
RR, blinking
02 GY, blinking
03 BW, blinking
04 RRGY, blinking
05
RRBW, blinking
06 GYBW, blinking
07 RRGYB, blinking
08
R-R-G-Y-B-W, color change
09 RRBW-BWY-RRGY-RRBY, color change
10 GY-BW-RRGY-RRBW-GBYW-RRGBWY-
RR, color change
11
RR-RRGY-RRGBYW-BYW-BW-Blackout,
color fade
12 Endless loop: Strobe, static light, color
change, color fade
Slave Mode
Press the MODE button to select sound control mode. When the Control Board shows SLAv then the LED
BC-6 Beam Effect is in Slave mode and can be controlled by a Master LED BC-6 Beam Effect device
Now set the Master device to one of the stand-alone modes ( Auto or Sound Control ).
DMX-controlled operation
You can control the devices individually via your DMX-controller. Every DMX-channel has a different
occupation with different features. Individual DMX channels and their features are listed under DMX
Protocol.
Addressing
The Control Board allows you to assign the DMX starting address, which is defined as the first channel from
which the LED BC-6 Beam Effect will respond to the controller.
Please, be sure that you don’t have any overlapping channels in order to control each LED BC-6 Beam
Effect correctly and independently from any other fixture on the DMX-chain.
If several LED BC-6 Beam Effects are addressed similarly, they will work synchronically.
Press the MODE button to select DMX controlled operation. When the Control Board shows d011 , you can
select the desired starting address via the UP or DOWN buttons.
Now you can start operating the LED BC-6 Beam Effect via your lighting controller.