19
•
EN
REMOTE CONTROL
Remote control IR-7
The device must be activated for remote control. For this, set menu item
Ir
to
IrYE
. When actuating a button,
always direct the remote control towards the sensor. There must be no obstacles between remote control and the
sensor.
Button
Function
BLACKOUT
LEDs off
AUTO
Automatic mode; press the Auto key again to switches
through auto programs (CC, CP), speed selection with (+)/(‒)
SOUND
Sound control (SUn); Mikrofonempfindlichkeit with (+)/(‒)
STROBE
Strobe effect for automatic mode, sound control and preset
colors (0-9); flash rate setting with (+)/(‒);press STROBE key
again to stop the strobe effect
SPEED
Switches the values of the auto programs (CC, CP, dE)
between 00 and 99
SENSITIVITY
%
MANUAL
A
UV
No function
R/G/B/W
Color mode; select colors with R/G/B/W setting with (+)/(‒)
FADE
Color fade mode (dE), use (+)/(‒) to set the FADE program
speed
0-9
Preset colors, brightness setting with (+)/(‒)
Notes:
•
The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery
contacts prevents the battery from being discharged during storage. Prior to the first operation remove the foil
from the battery support on the rear side of the remote control. Otherwise operation of the remote control is not
possible.
•
If the range of the remote control decreases, replace the battery. For this purpose, on
the rear side of the remote control press the small bar with the groove to the right and
at the same time remove the battery support. For operation, one 3 V button cell type
CR 2025 is required. When inserting, pay attention that the positive pole of the button
cell shows upwards in the support.
•
Remove the battery from the remote control as a precaution if the device is not used for a longer period of time.
CLEANING AND MAINTENANCE
The product is maintenance-free, except for occasional cleaning. You can use a lint-free, slightly dampened cloth
for cleaning. Disconnect the product from power before cleaning. Refer all servicing to qualified personnel. The
LEDs are permanently installed; they cannot be replaced.
PROTECTING THE ENVIRONMENT
Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for a disposal
which is not harmful to the environment. Devices marked with this symbol must not be disposed of as
household waste. Contact your retailer or local authorities for more information. Remove any inserted
batteries and dispose of them separately from the product.
You as the end user are required by law (Battery Ordinance) to return all used batteries/ rechargeable
batteries. Disposing of them in the household waste is prohibited. You may return your used batteries
free of charge to collection points in your municipality and anywhere where batteries/rechargeable
batteries are sold. By disposing of used devices and batteries correctly, you contribute to the
protection of the environment.
Summary of Contents for AKKU mini IP UP-4
Page 1: ......
