25
•
EN
OPERATING MODES
The Scene Setter offers three operating modes which can be selected via the
MODE SELECT
button. The LEDs
below the button indicate which mode is selected.
CHASE/SCENES
1
This mode will give you control of the DMX channels via the upper 24 channel faders. The lower 24 channels
faders will give you access to your memorized chase programs.
2
The master faders are in reverse position, i.e. Master A is at is at its maximum when positioned all the way up,
while Master B is at its maximum when positioned all the way down.
DOUBLE PRESET
1
This mode allows for a special working method often used in smaller theaters. Both fader rows have an
identical function.
2
Both, the upper channel faders 1-24, and the lower channel faders 25-48 control DMX channels 1-24.
3
Master fader A controls channel faders 1-24, and master fader B channel faders 25-48.
4
Example: If both master faders are moved up, they will output the DMX values of the upper channel faders 1-
24. Meanwhile, you can adjust the next scene with the lower channel faders 25-48. If you move both master
faders down, the controller will fade from the upper setting to the lower setting. Then you can prepare the next
scene and fade from the lower setting to the upper setting, etc.
5
This mode cannot be used for programming.
1-48 SINGLE PRESET
This mode will give you control of all 48 DMX channels. Use this mode during a show or in Program mode.
PROGRAMMING
Enable program mode
1
Press and hold down the
RECORD
button.
2
While holding down the
RECORD
button, tap the
FLASH
buttons
1, 6, 6
and
8
in sequence.
3
Release the
RECORD
button, the
RECORD
LED lights up, now you can begin programming your chase patterns.
NOTE
.
The first time you turn on your unit, the default setting of the Record Code is Flash buttons 1, 6, 6 and 8. You
may change the Record Code to protect your programs.
IMPORTANT
.
Always remember to exit Program mode when you won’t continue your programming, otherwise you may lose
control of your unit.
Security for your programs
To protect your programs from any editing by others, you may change the Record Code.
1
Enter current Record Code (
FLASH
buttons
1, 6, 6
and
8
).
2
Press and hold down the
RECORD
and
EDIT
buttons at a time.
3
While holding the
RECORD
and
EDIT
buttons, tap the desired
FLASH
button to enter a new Record Code.
The Record Code consists of 4 flash buttons (the same button or different buttons), be sure your new Record
Code consists of 4 flash buttons.
4
Enter your new Record Code a second time, all channel LEDs and scene LEDs will flash three times; now the
Record Code is changed.
5
Exit Program mode. Tap the
REC EXIT
button while pressing and holding down the
RECORD
button, release
the two buttons at a time, the Program mode is disengaged.
NOTES
.
1
The second time you enter your new Record Code different from that of the first time, the LEDs will not
flash, which means you’ve failed to change the Record Code.
2
When you enter a new Record Code the first time, provided that you want to cancel the new Record Code,
press and hold down the
RECORD
and
REC EXIT
buttons at a time to exit.
Summary of Contents for 70064545
Page 1: ......
Page 2: ......
Page 6: ...6 DE BEDIENELEMENTE UND ANSCHL SSE...
