23
•
EN
26
REC EXIT/ADD KILL button
•
Press this button and the RECORD button to exit from Program or Edit
mode.
•
In Add mode, multiple scenes or flash buttons will be on at a time. Press
this button to select Kill mode. Then pressing any flash button will kill
any other scenes or programs.
27
RECORD/SHIFT button
•
To enable Program mode hold down this button and tap the
FLASH
buttons
1, 6, 6
and
8
in sequence.
•
Shortly press this button to memorize a step in Program mode.
•
Press this button and a flash button (25-48) to memorize a chase
program.
•
The Shift function is used in with other buttons.
28
DOWN/BEAT REV button
•
The DOWN function allows to modify a scene in Edit mode.
•
BEAT REV inverts the running direction of all the programs with
memorized standard speed.
29
UP/CHASE REV button
•
The UP function allows to modify a scene in Edit mode.
•
CHASE REV inverts the direction of all programs currently running.
30
DELETE/REV ONE button
•
DELETE is used to delete a step of a scene.
•
REV ONE inverts the running direction of particular program. For this,
press and hold down this button, then press down the
FLASH
button
corresponding to your desired program and release together.
31
INSERT/0% OR 0-255 button
•
INSERT is used to add one or multiple steps to a scene.
•
Press this button and the SHIFT button to
select the mode of indication
(0% or 0-255) in the display
.
32
EDIT/ALL REV button
•
EDIT is used to active Edit mode.
•
ALL REV inverts the running direction of all programs.
33
Display with indicators
Shows the current activity or programming state.
34
Strobe button
To activate a connected stroboscope.
35
Power on/off
Switches the controller on and off.
36
Power input
Connect the power adapter provided here.
37
MIDI THRU/OUT/ IN jacks
To interconnect two Scene Setters for data exchange or to connect a
sequencer or another MIDI device.
38
DMX512 output
3-pin XLR jack for connecting the DMX input of the first DMX fixture.
39
Polarity switch
To adjust the polarity of the DMX output.
•
left position: PIN 2 = Data -, Pin 3 Data +
•
right position: PIN 2 = Data +, Pin 3 Data -
Prior to connecting light effect units, adjust the polarity with the sliding
switch. Set the switch to the left position for EUROLITE devices.
40
Line input
RCA jack for connecting an audio unit with line output (e.g. CD player,
mixer) to control the run of a chase to the rhythm of the music; when
connecting the jack the internal microphone is switched off.
41
REMOTE jack
6.3 mm jack for connecting a footswitch.
42
FLASH jack
6.3 mm jack for connecting an analog stroboscope.
Summary of Contents for 70064545
Page 1: ......
Page 2: ......
Page 6: ...6 DE BEDIENELEMENTE UND ANSCHL SSE...
