00027824.DOC, Version 1.1
10/11
DMX OUT
DMX IN
LIGHT 12
LIGHT 11
LIGHT 9
LIGHT 7
LIGHT 5
LIGHT 3
LIGHT 1
FUSE: F 4 A/230 V
POWER IN
AC 100-240 V 50/60 Hz
ON
OFF
LIGHT 10
LIGHT 8
LIGHT 6
LIGHT 4
LIGHT 2
100-240 V AC, 50/60 Hz ~
This recessed luminaire must never be installed at furniture.
The F-symbol means: this device can be installed on normal inflammable surfaces.
The symbol
- - -m
determines the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than the given value.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
This device must never be operated or stockpiled in sourroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical
shocks.
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported. Make sure that you pack the device in
the original state.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.
Connection to Controller EUROLITE LED PSI-1 DMX
Connect the luminaire to one of the 4-pin connection cables of the controller.
Attention:
The maximum length of the connection cable between luminaire and controller may not exceed
50 m.
