Direct connection to your tablet
The easiest and fasted way to control the DMX fixtures
connected through your tablet, is the AP mode (access
point). This mode directly connects your tablet to the
freeDMX AP and uses it as wireless access point.
lights permanently,
the devices have been paired.
1
2
3
4
5
The AP mode must be active (ACCESS POINT
indicator is flashing).
Switch on the WiFi function on your tablet.
Connect the tablet to the freeDMX AP. As a basic
setting, the network is not password-protected, so there
will be no password prompt.
Note: xxxxxx represents the last 6 digits of the SSID
(see label on unit). Each unit has a digit sequence of its
own. It is possible to change the device name using the
web setup page.
Once the ACCESS POINT indicator
You can now control your light effects through the
Light
‘
J app on your tablet.
freeDMX_AP_xxxxxx
If you connect the freeDMX AP as a client to your WiFi
network, you can stay on your router
‘
s network while
working with Light
‘
J. This has the advantage that your tablet
can access the internet and remains fully operational.
1
2
3
First, connect your tablet directly to the freeDMX AP as
described before.
Then open a web browser and enter the IP address of
the freeDMX AP: http://192.168.4.1. The setup page
will appear:
Go to the
“
Network
“
tab and select the network into
which you want the freeDMX AP to connect to.
WiFi connection
WiFi 1
WiFi 2
my WiFi
17
English
Direct connection to your tablet
The easiest and fasted way to control the DMX fixtures
connected through your tablet, is the AP mode (access
point). This mode directly connects your tablet to the
freeDMX AP and uses it as wireless access point.
lights permanently,
the devices have been paired.
1
2
3
4
5
The AP mode must be active (ACCESS POINT
indicator is flashing).
Switch on the WiFi function on your tablet.
Connect the tablet to the freeDMX AP. As a basic
setting, the network is not password-protected, so there
will be no password prompt.
Note: xxxxxx represents the last 6 digits of the SSID
(see label on unit). Each unit has a digit sequence of its
own. It is possible to change the device name using the
web setup page.
Once the ACCESS POINT indicator
You can now control your light effects through the
Light
‘
J app on your tablet.
freeDMX_AP_xxxxxx
If you connect the freeDMX AP as a client to your WiFi
network, you can stay on your router
‘
s network while
working with Light
‘
J. This has the advantage that your tablet
can access the internet and remains fully operational.
1
2
3
First, connect your tablet directly to the freeDMX AP as
described before.
Then open a web browser and enter the IP address of
the freeDMX AP: http://192.168.4.1. The setup page
will appear:
Go to the
“
Network
“
tab and select the network into
which you want the freeDMX AP to connect to.
WiFi connection
WiFi 1
WiFi 2
my WiFi
17
English
