00106532.DOC, Version 1.0
15/16
The device must only be connected with an electric installation carried out in compliance with the IEC-
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA. Lighting effects must not be connected to dimming-packs.
OPERATION
After you connected the device to the power supply, the LED LP-50 Logo Projector begins running. Use the
selector switch on the rear to select static or slow rotation of gobo.
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts. If the power supply cable of this device
becomes damaged, it has to be replaced by a special power supply cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
100-240 V AC, 50/60 Hz ~
Power consumption:
65 W
Maximum ambient temperature
T
a
:
45° C
Maximum housing temperature
T
C
:
75° C
Min. distance from flammable surfaces:
0.5 m
Min. distance to lighted object:
0.5 m
Type of LEDs:
50 W COB LED, white
Number of LEDs:
1
Beam angle:
19°
Color temperature:
9200 K
Gobo rotation:
3.5 R/min.
Dimensions (LxWxH):
230 x 167 x 175 mm
Weight:
1.6 kg
Please note: Every information is subject to change without prior notice. 06.02.2017 ©
Summary of Contents for 51799375
Page 1: ......
