00118929.DOCX, Version 1.0
11/12
WEEE Directive
When to be definitively put out of operation, take the unit(s) to a local recycling plant for a disposal
which is not harmful to the environment. Do not dispose of as municipal waste. Contact your retailer or
local authorities for more information.
INSTALLATION
Place the device on a level surface or fasten it to a wall or ceiling with the mounting bracket. Always choose
screws and plugs which are suitable for use in your wall/ceiling and have enough holding power. Fasten the
device in such way that it will not fall down.
OPERATION
Connect the effect to the mains. With the power switch, you can switch the device on and off. Once switched
on, the lamp begins to burn and the reflector starts rotating.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the lamp. Maintenance and service operations
are only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
Replacing the lamp
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
Procedure:
Step 1:
Unscrew the screws of the mounting brackets and remove the color cap.
Step 2:
Remove the old lamp from the socket and insert the new lamp.
Step 3:
Replace the color cap and tighten the screws. Do not operate the device without color cap!
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
CAUTION!
