00121152.DOCX, Version 1.0
23/32
Installing/Replacing the lamp
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
For the installation, you need one 230V/300W GY-9.5 lamp.
Procedure:
Step 1:
Unscrew the three screws of the mesh cover (see
Graphic 1
) and open it carefully.
Step 2:
If replacing the lamp, remove the old lamp from the socket.
Step 3:
Insert the new lamp in the socket.
Step 4:
Replace the mesh cover and tighten all screws.
Graphic 1
Do not operate this device with opened mesh cover!
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
CAUTION!
