EuroLite 40001894, User Manual

Page: 29 / 36

00138004, Version 1.0 29/36
Stand-alone mode
Static color
In the STATIC mode the device will constantly emit one of 3 white tints.
1 Press the MENU button so many times until STATIC is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired white color. Confirm with the ENTER button.
Automatic mode
In automatic mode, several show programs are available that run at an adjustable speed.
1 Press the MENU button so many times until AUTO is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program (01-03) . Confirm with the
ENTER button.
2 Press the MENU button so many times until SPEED is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from 01 (slow) to SP
09 (fast). Confirm with the ENTER button.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the MENU button so many times until SOUND is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program ( 01-03 ). Confirm with the
ENTER button.
2 Press the MENU button so many times until SPEED is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from 01 (slow) to 09
(fast). Confirm with the ENTER button.
3 Press the MENU button so many times until SENSITIV is indicated in the display. Confirm with the
ENTER button. Use the buttons UP and DOWN to Adjust the microphone sensitivity to the volume of the
music ( 01 = low, 09 = high).
4 If you enable the silent scene mode ( on setting) in menu item SILENT , the LEDs will be switched off if
the volume is too low or if there is no sufficient bass beat. If you disable this mode ( off setting) the LEDs
remain on during periods without music.
White color setting
In the color mode COLOR, the LEDs can be adjusted for brightness. The device will constantly emit the color
adjusted.
1 Press the MENU so many times until COLOR is indicated in the display. Confirm with the ENTER button.
2 Now the display indicates the letter “W” for warm white color and the corresponding brightness value
(000-255) . Use the buttons UP and DOWN to adjust the desired brightness. Confirm with the ENTER
button. Now “C” for cold white and the corresponding brightness value (000-255) can be set. Confirm
with the ENTER button.
Color temperature
In TEMPERAT mode the device will constantly emit white light. The color temperature of the light beams is
adjustable
.
1 Press the MENU button so many times until TEMPERAT is indicated in the display. Confirm with the
ENTER button.
2 Use the buttons UP and DOWN to select the desired color temperature (2800K–6500K) . Confirm with
the ENTER button.
Total brightness
Menu DIMMING allows adjusting the total brightness for all stand-alone operating modes.
1 Press the
MENU
button so many times until
DIMMING
is indicated in the display. Confirm with the
ENTER button.
2 Use the buttons UP and DOWN to adjust the desired brightness ( 1 = dark, 100 = bright). Confirm with the
ENTER button.